Middleeast Valve is one of the best Check valve supplier in UAE.  We supply to cities like Dubai, Sharjah, and Abu Dhabi.

Functionality of Check Valves:

Check valves, also known as non-return valves or one-way valves, operate on a simple yet essential principle: they allow fluid to flow in one direction while preventing reverse flow. This functionality is critical in applications where backflow could lead to contamination, damage, or inefficient operation.

Here’s how a typical check valve works:

  1. Flow Direction: Check valves are designed to allow fluid to flow in one direction (the “inlet” or “upstream” side) while blocking flow in the opposite direction (the “outlet” or “downstream” side).
  2. Flap or Disc: Inside the check valve, there is a mechanism that can be a flap, disc, or ball, which moves in response to the fluid’s flow. When the fluid flows in the desired direction, the mechanism is pushed open by the force of the fluid.
  3. Seating Mechanism: On the downstream side of the check valve, there is a sealing surface (usually a seat or o-ring) where the flap or disc makes contact when no flow is present. This creates a seal that prevents fluid from passing through in the reverse direction.
  4. Pressure Differential: The check valve relies on the pressure differential between the two sides. When the pressure on the upstream side is greater than the downstream side, it overcomes the force of gravity and any spring tension, if present, keeping the valve in the closed position. When the pressure on the upstream side is lower than the downstream side, the valve opens, allowing fluid to flow.
  5. Automatic Operation: Check valves do not require any external control or manual operation. They open and close automatically based on the direction of fluid flow and the pressure differential.

In the UAE, a Check Valve Supplier plays a vital role by offering an essential component designed as a unidirectional gateway for fluids. These valves are instrumental in facilitating the controlled movement of fluids in a desired direction while effectively blocking any reverse flow. Their utility extends across a wide range of industries, ensuring the maintenance of accurate and regulated fluid flow.


Body Material- Cast Iron and Cast Steel (LF2, A216, WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F91), DUPLEX AND Super duplex STEEL [ F51, F53,F55 ] Forged Steel A105, A105N, F11, F22, F304, F316, F91] , Alloy20 , Hastelloy ALBR.

Size- ½” – 80”

Class-150 – 2500; PN10 – PN-450

Ends- Threaded, socket weld, butt weld, flanged, lug, wafer.

Check valve types:

  • Swing check valve
  • Ball check valve
  • Lift check valve
  • Dual plate check valve
  • Silent check valve
  • Non slam swing check valve
  • Tilting disc check valve
  • Pressure seal check valve
  • Foot Check valve
  • Piston check valve

Check valve Industries:

  • Chemical Industry
  • Pulp and paper Industry
  • Marine Industry
  • Mining Industry
  • Power Generation Industry
  • Oil and Gas Industry
  • Nuclear Industry
  • Petrochemical Industry
  • Water Treatment Plants
  • Textile Manufacturing Industry

Check valve parts :

  • The body
  • A disc
  • A star guides
  • A spring
  • Front Plate
  • Gasket
  • Stem
  • Bonnet
  • Actuator

Visit us: https://www.middleeastvalve.com/product-category/check-valve/